An Embedded Technology Solutions Company
ARM9 Board With WindowsCE
ARM9 Board With Linux
ARM7 Board
ARM7 With Peripherals
PIC Board
ARM + FPGA
ARM7 Board
Buy
Herculis Board
Herculis Board
Herculis is a board designed to explore the combined power of an FPGA and an ARM Processor. This starter kit is a low-cost development platform designed to evaluate the various performance parameters of ARM and FPGA and is based on NXP LPC2148 and Spartan3-xc3s400 FPGA. The kit empowers experienced and novice designers an easy way to get started immediately with innovative product designs. The kit contains everything needed to evaluate, benchmark, prototype embedded hardware and software designs which combines the power of ARM and FPGA on the same platform.
Variants => BX CX DX 8051 Add-on
 Core NXP(Philips) LPC2138 NXP(Philips) LPC2148 NXP(Philips) LPC2129 NXP(Philips) 89V51RD
 Max Clock Frequency 60 MHz 60 MHz 60 MHz 12MHz
 Internal Flash 512KB 512KB 256KB 64KB
 Internal Ram 32KB 32KB 16KB 1KB
 EEPROM 512KB 512KB 512KB yes
 Keypad 4x4 4x4 4x4 yes
 16x2 LCD yes yes yes yes
 LED 8 8 8 yes
 7-SEG Display yes yes yes yes
 Serial Port 1 Port 1 Port 1 Port yes
 ADC 4Ch / 10bit 4Ch / 10bit 4Ch / 10bit NA
 DAC yes yes NA NA
 RTC yes yes yes yes
 Relay yes yes yes yes
 USB Device NA yes NA NA
 USB Host NA NA NA NA
 ADC POT NA yes yes NA
 Stepper Motor Driver yes yes yes yes
 Push Button Switch for Ext Int. yes yes yes NA
 GPIO yes yes yes yes
 JTAG yes yes yes NA
 SPI yes yes yes NA
 I2C yes yes yes yes
 External Interrupt yes yes yes yes
 Triton IDE Starter Edition Starter Edition Starter Edition Starter Edition
 uCOS yes yes yes NA
 FreeRTOS yes yes NA NA
 Serial Cable yes yes yes yes
 SMPS Power Supply yes yes yes yes
Herculis Board is specifically designed to be used in the following domains:
Audio/Video based consumer application
Military and aerospace
Industrial and control systems
Automotive
Storage and networking
Medical electronics
Point of sale terminals
Herculis Board
Please send an email to us at sales@oasistechsol.com or call us at +91-20-64000203, 66870500 to get a quotation.
Sprit-II board is supplied with an evaluation version of Oasis Technologies Triton IDE, the evaluation version do not have any restriction with respect to Project management, code compilation and downloading, Only that the debugging is restricted to 32K of code size. Visit Triton IDE for more information of Triton IDE.

Evaluation version of Triton IDE is provided with the Sprit-II board. One can compile and build the embedded application using Triton IDE with absolutely no restriction, and one can also debug the embedded application of less than 32K of code size.
Absolutely, in fact the design of Sprit-II board is made keeping this requirement in mind. A 32 pin header having all the required signals for interfacing any external circuit is provided along with power and ground pins. Only care that one needs to take is that the interfaced circuit should adhere to the current and voltage requirement of the NXP(Philips) LPC 21xx micro controller on the Sprit-II board
Sprit-II board is designed and packaged in such a way that one can quickly get started with ARM7 development. Triton IDE provided with Sprit-II board, do not have any restriction as far as application compilation and downloading is concerned unlike other equivalent boards out there in the market.
Yes third party tools are supported very well by Sprit-II board; the board does not have any proprietary technology which can restrict use of any third party tools as long as they are compatible with ARM7 and NXP(Philips) LPC21xx architecture.
One can use Sprit-II board in there existing or future projects and there is no royalty associated with this
The hardware board manual describes the interfacing of the on board components in details.
Keeping the available on chip memory in mind one can surely execute a small footprint RTOS based application on Sprit-II board.
There is a one year warranty associated on Sprit-II board for any manufacturing defect.
There is a one year warranty associated on Sprit-II board for any manufacturing defect.
Oasis encourages its customers to opt for hardware with integrated peripheral, please go through our Single Board Computer’s product page for choosing a product suiting your peripheral requirements.
The training videos and animation along with the reference source code and Triton IDE can get any person with embedded systems background getting started with Sprit II board. Having basic understanding ARM and C language is an added plus.
Please refer to the variants section above to find a detailed description about the available variants.
Name
Company Name
Email ID
Phone No.
City
Existing Oasis Customer
Enter Your FAQ
Name
Company Name
Email ID
Phone No.
City
Existing Oasis Customer
Enter Your FAQ
Company | Terms of use | Sitemap | Contact Us
© 2012 Oasis Technologies Pvt. Ltd. All Rights Reserved.