An Embedded Technology Solutions Company
ARM9 Board With WindowsCE
ARM9 Board With Linux
ARM7 Board
ARM7 With Peripherals
PIC Board
ARM + FPGA
ARM7 Board
Buy
Taurus Board
Taurus Board
AT9263 Board (mounted on Taurus Base Board) is an embedded development platform which is based on the ARM926EJ-S. It is specifically designed for advanced embedded development, wherein the requirements are for low-power and high computing power. The processing power of ARM9, when combined with the on-board memory and integrated peripherals make it an ideal choice for mission critical embedded application development.
 Core Atmel AT91SAM9263
 Max Clock Frequency 200MHz
 Internal Ram 96KB
 Flash 64MB
 SDRAM 64MB
 EEPROM 512KB
 Keypad 4x4
 LED 8
 Serial Port 4 Ports
 ADC NA
 Audio DAC NA
 RTC yes
 USB Device yes
 USB Host yes
 Ethernet Interface 10/100Mbps
 Push Button Switch for Ext Int. yes
 GPIO yes
 JTAG yes
 SPI yes
 I2C yes
 SD/MMC Card yes
 CMOS Camera Interface yes
 Audio In/Out NA
 External Memory yes
 External Interrupt yes
 Triton IDE Starter Edition
 Embedded Linux yes
 Serial Cable yes
 SMPS Power Supply yes
 Ehternet Cable yes
 USB Cable yes
Taurus Board is specifically designed to be used in the following domains:
Hardware:
Processor is an Atmel AT91SAM9263 based on ARM926EJ-S core and it runs at a speed of 200MIPS at 180MHz.
SDRAM, which is a 64Mbyte 32 bit wide
NAND FLASH, which is a 64Mbyte 8 bit wide
SPI DATA FLASH, which is a 4Mbyte serial data flash (optional)
EEPROM which is a 64Kbyte TWI based EEPROM
One Serial Debug Port and Three Serial COM Port
One CAN Port
RJ-45 10/100Base-T Ethernet interface port with 3 status LED's
USB V2.0 full speed or Low speed Host Port
USB V2.0 full speed Device Port
IrDA port supporting data transfer speed from 2.4Kbps to 115.2Kbps (optional)
TWI based Real Time Clock
Audio DAC Header.
Touch screen Controller (optional) and 40 Pin connector for interfacing TFT LCD
30 Pin connector for interfacing CMOS camera (Image Sensor Connector)
SD/MMC card connector
One 240 Pin Extended General Purpose I/O Connector (optional)
One 44 Pin 1.8" HDD Connector (optional)
4x4 Key Matrix
Eight General purpose LED's for user
One external interrupt Source with push Button
Reset Push Button
20 Pin standard JTAG interface for Debugging
Power Input DC 7.5V
Tarus Board
Please send an email to us at sales@oasistechsol.com or call us at +91-20-64000203, 66870500 to get a quotation.
Software:
Drivers Supported:
USB Pen drive
Ethernet
Wi-Fi
Bluetooth
I2C
SPI
USB Printers, Keyboard, Mouse
MMC/SD Card Interface
RTC
USB based Webcams (Streaming, Capture & Snapshot)
Touch Screen
Parallel Port Printer
TFT
Network Protocol (FTP,HTTP)
Taurus board is supplied with an evaluation version of Oasis Technologies Triton IDE, the evaluation version do not have any restriction with respect to Project management, code compilation and downloading, Visit our website for more information of Triton IDE  ( http://www.oasistechsol.com/triton_ide.html )
We have 'Ethernet based JTAG Debugger' in our product range, which can be used for hardware debugging. Visit our website for information of JTAG Debugger
( http://www.oasistechsol.com/jtag_debugger.html )
Absolutely, in fact the design of Taurus board is made keeping this requirement in mind. A header having all the required signals for interfacing any external circuit is provided along with power and ground pins. Only care that one needs to take is that the interfaced circuit should adhere to the current and voltage requirement of the AT91SAM9263 based ARM9 processor on the Taurus board.
Taurus board is designed and packaged for GUI based applications which requires LCD/VGA display, along with the USB, SDIO, Ethernet based connectivity interface one can quick start the development activity for application such as PDA, Thin-Client, GPS etc.
Yes third party tools are supported very well by Taurus board; the board does not have any proprietary technology which can restrict use of any third party tools as long as they are compatible with AT91SAM9263 based ARM9 architecture.
One can use Taurus board in there existing or future projects and there is no royalty associated with this.
The hardware board manual describes the interfacing of the on board components in details.
Keeping the available on chip memory in mind one can surely execute a small footprint RTOS based application on Taurus board.
There is a one year warranty associated on Taurus board for any manufacturing defect.
n case of any problem on can write to support@oasistechsol.com, our support team can answer your query in the shortest possible time. When the issue is related to malfunctioning of the hardware, then the board can be sent to oasis for repair.
Oasis encourages its customers to opt for hardware with integrated peripheral, please go through our Single Board Computer’s product page for choosing a product suiting your peripheral requirements.
The training videos and animation along with the reference source code and Triton IDE can get any person with embedded systems background getting started with Discovery board. Having basic understanding of ARM, C language and Linux / Win CE as operating system is an added plus.
Please refer to the variants section above to find a detailed description about the available variants
Name
Company Name
Email ID
Phone No.
City
Existing Oasis Customer
Enter Your FAQ
Company | Terms of use | Sitemap | Contact Us
© 2012 Oasis Technologies Pvt. Ltd. All Rights Reserved.